Monday, May 26, 2014

Captain America The Winter Solider

Review of Captain America: The Winter Solider

The Good:
Great action sequences
Good CGI
New characters
Deeper insight into the Captain America character
Scarlet Johansson
Nick Fury removes his eye-patch

The Bad:
Bland story line
No emotional content
Did not live up to expectations
Laid the foundation for another sequel
Scarlet Johansson's straight hair

This movie was hyped up by good reviews and even a personal recommendation, so my expectations were high for this movie. I was disappointed that this movie lacked an emotional depth that clawed you into the story. I know this is high expectations for a Marvel superhero movie but I was expecting more. It did have good actions sequences and good fight sequences but it was mostly eye candy and no substance.
Scarlet Johansson looks good as always but I didn't care for the straight hair. She looked much better with curly long hair as in Iron Man 2.
It actually had the foundation for a great story but they focused more on the fighting than the story line. This is typical Hollywood and it will bite them in the ass as they focus less and less on the story. (ie Pacific Rim, John Carter, etc..)

Saturday, January 25, 2014

Aqueon 75 Gallon Aquarium

Review of the Aqueon 75 Gallon Aquarium

Filter: FX5 (Acurel LLC Economy Activated Filter Carbon Pellets, 3-Pound, 

Fluval Biomax Bio Rings - 500 gram x4)

Heater: EHEIM Jager Aquarium Thermostat Heater 300W
Stand: Petsmart stand
Substrate:  Carib Sea Ecco-Complete Live Freshwater African Cichlid Gravel
Thermometer: Marina Floating Thermometer with Suction Cup
Test kit: API Freshwater Master Test Kit
Water Changer: Python No Spill Clean and Fill Aquarium Maintenance System, 50-Feet

MDF stand needed reinforcement
Substrate has to be rinsed many times before use
FX5 needed to the cleaned and lubed for optimal performance
FX5 requires a lot of media
FX5 requires a special screwdriver
Test kit requires many steps
Python leaks around facet nozzle when filling tank with water

Price for a new 75 gallon tank
FX5 has great filtration
Cycling took 7 days
Substrate maintains pH
Python makes water changing easier than buckets

This is a review of a 75 gallon setup for an African Cichlid tank. 

The stand:
This was the standard stand sold by Petsmart from about 2008-2011. I bought this stand from a Craiglist add for $80. It was in very good shape and according to Petsmart can hold the weight of a 75 gallon tank. I have seen many people use the same exact stand which also was available in fake wood tone laminate, for a 75 gallon set up but I wanted more assurance. I was surprised that it was made from particle board and mdf. Not strong enough in my opinion. I liked this stand over the current model because this actually looked like a piece of furniture instead of something that "looked" like a tank stand. 

I reinforced the stand with 2x4 and 1x2. I put 4 1x2 along the back and put 2x4 on the bottom

I put metal L brackets for joints. Be sure to use the ones with the shortest length screws or they will go through the other side. 

The tank from PetSmart is the Aqueon brand. Aqueon is an aquarium suppler for PetSmart. For$220 you get the tank and top. The tank itself is very nice with thick glass. I did have to remove some excess silicon using a razor. Be very careful not to disturb the seal.
The top is a single hinge glass top with a plastic strip. You can cut the plastic strip to the needs of your tank. I really liked the design of the top because it allowed me to make an almost completely enclosed top. This helps with water evaporation and reduces the chance of making the room smell like a pet store.

The light is a standard T8 bulb. It says that it is full spectrum but I suspect it is a standard fluorescent bulb. It make the take very bright. If you have a shy species of  fish, you'll need a lot of cover or get a dimmer bulb. 

The substrate I used is Carib-Sea. They are the best brand for specialized substrate. You have to rinse the substrate before you put it into the tank. I cut a small hole in the bag and just used a hose outside to rinse the substrate. It has be rinsed very, very well or you will have a cloudy tank for several days. It does maintain the pH but I'm not sure how well. My tap water is 7.4 and my tank pH is between 7.4-7.6. I'm not sure how much if at all is due to the substrate. The African Cichlids do like to play it and move it around.

The Filter:
I bought an Fluval FX5 for the 75 gallon tank from Craigslist. This filter is rated for a 400 gallon tank. I wanted the best filter I could get so that I wouldn't have to deal with cleaning the tank as often. This is a massive filter. It just barely fits in the cabinet in the stand but it does fit. This filter is no longer made. Fluval has an FX6 which uses the same motor and made some tweaks, like flow control. The FX5 does not have a flow control feature. When you first start it up, be sure to fill it up almost all way to the top to start it. The instructions say to fill it half way but this will cause a lot of air and strain the motor. It will prime the filter for 60 seconds, stop, release the air bubbles and then turn back on. The filter will also stop every 24 hours to release all the air it has collected. The 24 hour time starts from the time you plug it in. 

If you do plan on getting one, be sure to check the condition of the orange knobs that tighten the lid. People over tighten these and the plastic part often breaks because it is connected to a metal T rod. 

This is a great filter but it has its issues. The main problem I had was noise. Some people have had great luck with them and they can't tell that the unit is even on. The various forum posts suggest that Fluval made a bad batch. There are several things you can do to reduce the motor noise. The best thing you can do is clean the motor housing. This requires a special screwdriver because you need one that is over 7 inches long. This is the only way you can get to the screws to unlatch the motor. 
When you remove the filter, there is rubber o-ring that you need to keep. This goes on the outside of the impeller casing as shown below. 

This is how my unit looked when I took it apart the first time.

Be sure to clean everything so there is not dirt around the impeller. There was also debris in the actual impeller. This can cause an imbalance which will cause noise. 

Check the intake area for the impeller and make sure that is clean

I thought that I had the problem solved so I put it all back together and started it up. The noise was still there. It actually seemed louder after I cleaned it. I did more research and found suggestions make any impeller more quiet. There was one suggestion of lubing the impeller with KY jelly. The noise was unbearable so decided to try it. 
I lubed the impeller on the end points, the shaft and also the top. Anywhere I saw friction marks, I lubed it with KY jelly. The magnetic motor spins this impeller from the outside creating the suction needed to move the water. 

I put it back together again and it ran it. It was much, much more quite. So quite, that I could hear the bubbles from the air hose I had in the tank. It wasn't completely silent, like I've heard other people state but it was a reasonable amount of noise. 
You will get extra KY jelly in your tank from the lubrication. You'll have to fish them out with a net which is easy because they float to the top. It's been running well for two weeks now. I'm not sure how long the lubrication lasts since KY breaks down quickly. I suspect I will need to lube it at least once a year. 

After about a month, it started making noises again! So I bit the bullet and bought a new impeller. It was $50 but it did solve the problem. After 2 months, it is still quiet. I believe the problem is the plastic bushings get worn down and there is space for the impeller to move around to create the noise. The instructions below how to get in there and clean it. 

Basically I paid $50 for the wire tool and new plastic bushings.

The key to any healthy aquarium is to do frequent water changes. They say that you should do a 10% water change every week. Since this was a 75 gallon tank, I needed another way of changing the water without using buckets. I will have to determine how often I really do need to do water changes. I purposely bought a really powerful filter so I wouldn't have to do water changes that often. Since this is a new tank, I will do weekly water changes until the cycling of the tank is complete.

I used an old filter from an established tank to help cycle this tank. I took the filter (cotton cloth) and rinsed it out in the tank. It was the top filter from a Fluval C4 (review here)You will get a bacterial "bloom" which will make the water look cloudy. This will last 7-10 days depending on your filtration and how quickly the bacteria gets established. Mine was clear in 4 days.

I used the API test kit to test, ammonia, nitrate and nitrite levels. All were 0 so I added two white cloud mountain minnows to help establish the tank. The API test kit really is a comprehensive test kit. The test for ammonia is easy and the test for nitrate and nitrite have an addition step. It's not bad but I would think they could come up with an easier way.

Poetic Slimbook Leather-Like Case for Nook HD+

This is a review for the Poetic Slimbook Leather-Like Case for the Nook HD+
There are many cases for the Nook HD+ but think case is the best value for the price. It was purchased on Amazon for $10. If you catch it right, you can find it as low was $7. Yes it is not leather but it is durable. The material is easy to clean and holds up well to use.

It has several pockets inside the case for storing small items like cards and papers. The great feature about this case is that is has a magnet when you close to tell the Nook to turn off. Very nice feature and works well.

The cover fold is a little stiff when you first put it in the case. Just bend the cover in the opposite direction a few times and it will fold flat. It does offer a tab to fold it out and make the Nook stand up but it only has one setting. It only has one tab to display it horizontally at one angle. It doesn't have a tab to lay it vertically. 

The best feature is the rubber band you can use to hold the Nook in one hand. This is a great feature when you doing other activities while looking at the Nook. It doesn't fall out of the case and is great for kids so they don't drop the Nook. 

Saturday, January 18, 2014

Select Surfaces Lament Flooring from Sam's Club Review

This is a brand that makes flooring that is sold at Sam's club. I have put in 2 other brands if laminate flooring. One was from BJs and another from Home Depot. The BJs flooring was fair but a great price. It held up to traffic really well but was only 10mm. The Home Depot was Pergo flooring which I got at a discount because the pattern was being discontinued. It was about 10% more in price than the BJs brand but was much better in quality.
The Select Surface flooring had a really nice pattern and color. 

The surface is "raised" to mimic the contours of real wood. Up close the patten wouldn't fool Woody Woodpecker but from normal view distance(standing above it), it looked nice.

The flooring was 14mm which included the foam backing. The foam backing was really thin so I would use another vapor barrier for a basement floor. The backing did not cover 100% of the back. It's more of a thin cushion layer than anything else and I do mean it was thin. 
The tongue and groove joints are what you would expect from most mid-grade laminate flooring - easily breakable. Take care when installing. 
I did like how tight these boards fit. It is almost tight enough to put into a kitchen, almost. 
The end moldings were a fair price and came with 3 different joint pieces which was very nice.

Overall it was a decent floor for the price. You didn't have to wait for a sale or hope your pattern was discontinued and pray they had enough in stock for your project. 

I would recommend this flooring for medium traffic areas that is prone to some spills. 

Your best bet is to catch sale on a better brand for high traffic areas. 

Friday, January 3, 2014

Don't go around saying the world owes you a living. The world owes you nothing. It was here first.
~Mark Twain